基于Legendre伪谱法的UGV避障路径规划

针对传统优化方法不易解决含有复杂动力学约束的路径规划问题,提出利用勒让德伪谱法(Legendre Pseudospectral Method,LPM)对地面无人驾驶器(unmanned ground vehicle,UGV)的避障路径规划进行研究。通过建立UGV的动力学模型和障碍物模型,整合了基于LPM的路径约束条件。最后应用以LPM为基础开发的MATLAB插件包DIDO,计算得出了优化路径。仿真实验中以UGV移动路径规划为例,设计实现了UGV的避障规划。仿真结果表明此方法具有较快的计算速度和准确性。     

军用无人地面车辆无源北斗／SINS组合导航系统研究

提出将无源北斗／SINS组合导航系统应用于军用无人地面车辆,采用“紧耦合”方式设计了组合结构,选择伪距为量测量,对量测高程进行了“虚伪距”化处理,建立了三维量测方程,通过间接法进行了扩展卡尔曼滤波设计并进行了仿真。结果表明,位置和速度误差得到了有效抑制,在仿真设定的常规环境噪声条件下,达到了军用无人地面车辆导航的要求。     

剪切机最佳剪切间隙的研究

本文在分析剪切机剪切过程的基础上,建立了剪切过程的物理、数学模型,并导出了剪切机最佳剪切间隙的理论表达式。工程实践证明,该理论表达式是合理、有效的。     

EMS型低速磁浮列车U型电磁铁设计方法研究

针对EMS型低速磁浮列车的U型电磁铁,研究其气隙磁密及结构参数的设计方法.气隙磁密应选为铁芯材料的磁导率下降到其最大值的90％时所对应的磁密.结构参数包括极长、极高、窗宽、窗高和轭厚,极长影响牵引效率及过弯能力,极宽影响承载能力和导向刚度,窗宽和窗高影响重量,但随轨宽而定,轭厚按磁轭与磁极的磁密相等的原则来选取.     

Influences of different crossing types on dynamic response of underground cavern subjected to ground shock

An intersecting cavern is a common structural form used in underground engineering, and its safety and stability performance directly control the service performance of the whole project. The dynamic re-sponses of the three kinds of crossing type (+-shaped, T-shaped, L-shaped) caverns subjected to ground shock were studied by numerical simulation. The velocity plus force mode boundary setting method was proposed in the coupled static and dynamic analysis of a deep underground cavern. The results show that, among the three types of crossing caverns, the+-shaped cavern is the most significantly affected by the dynamic action, followed by T-shaped, and then L-shaped caverns. The vault settlement, straight wall deformation, vault peak particle velocity, effective plastic strain of surrounding rock, and maximum principal stress and strain at the bottom of the lining of the straight wall increase with the increase of cavern span. The vault settlement, straight wall deformation, effective plastic strain of surrounding rock, and the maximum principal stress and strain at the bottom of lining to the straight wall decrease with the increase of lateral pressure coefficient, and the peak particle velocity at the vault increases. The variation is small compared with the change of cavern span. The influence range of the underground cavern intersection is two cavern diameters from the intersection centre. The bottom of the straight wall at the intersection is the weak part. It is suggested to thicken the support locally to improve the stability of the cavern.     

Effect of tongue clearance on hydraulic performance of double support vortex pump

In order to study influence of tongue clearance on the hydraulic performance of double support vortex pump, three dimensional flow model with symmetric variable size tongue clearance was established by changing section parameter of tongue clearance, and applied to numerically simulate the steady inner flow in a vortex pump based on fixed working conditions and impeller through ANSYS FLUENT. The numerical results show the influence of tongue channel with two sections (non-uniform and uniform sections) on flow field characteristics in vortex pump. Firstly, the variation of tongue channel section changes the vortex structure distribution in circumferential flow channel. Specifically the spiral forward vortex structure in the circumferential direction shifts to large radius side with increasing tongue width. Secondly, the circumferential velocity gradient and axial pressure gradient both diminish with the increase of the tongue section, and the inlet/outlet pressure difference and velocity distribution also reduce with increasing tongue channel section. Finally, for vortex pump with non-uniform section of tongue channel, the head diminishes and the efficiency remains constant approximately with the increase of the tongue width, while the head and the efficiency both diminish for uniform section of tongue channel.     

一种新的星载高分辨宽测绘带SAR运动目标

本文针对星载多通道高分辨宽测绘带合成孔径雷达系统,提出了一种地面运动目标检测和参数估计方法,该方法首先利用空时自适应处理进行杂波抑制,然后采用传统SAR成像处理得到模糊的运动目标图像,接着利用恒虚警检测技术检测出所有运动目标,包括真实目标和由于多普勒模糊引起的虚假目标,再根据模糊图像的空间位置关系从所有成像目标中检测出运动目标的真实成像位置,最后根据运动目标的斜距历程得到因运动目标速度引起的图像位置偏移,由此估计得到运动目标速度。该方法具有运算量小、检测精度高等优点,星载仿真数据验证了本文方法有效性。     

关节对中误差对机械臂末端定位精度影响

针对机械臂关节对中误差对机械臂末端定位精度影响进行研究。以6自由度机械臂为研究对象,利用D-H法建立了机械臂运动学模型,并建立对中误差传递数学模型。利用蒙特卡洛方法以MATLAB为平台进行了误差分布仿真实验,得出了由于对中误差引起的机械臂末端定位误差分布特点,以及在不同对中误差等级下,机械臂末端定位误差概率分布情况。为对中误差修正提供了参考基础,同时为机械臂定位精度评价提供了定量化依据。     

Reduction of global effects on vehicles after IED detonations

Global effects caused by the detonation of an IED near a military vehicle induce subsequent severe acceleration effects on the vehicle occupants. Two concepts to minimize these global effects were developed, with the help of a combined method based on a scaled experimental technology and numerical simulations. The first concept consists in the optimization of the vehicle shape to reduce the momentum transfer and thus the occupant loading. Three scaled V-shaped vehicles with different ground clearances were built and compared to a reference vehicle equipped with a flat floor. The second concept, called dynamic impulse compensation (DIC), is based on a momentum compensation technique. The principal possibility of this concept was demonstrated on a scaled vehicle. In addition, the numerical simulations have been performed with generic full size vehicles including dummy models, proving the capability of the DIC technology to reduce the occupant loading.     

低频宽带SAR/GMTI试验系统

低频宽带SAR/GMTI能对开阔或叶簇覆盖地区的静止和运动目标进行侦察、监视及成像.详细介绍了低频宽带SAR/GMTI系统及其信息处理过程,讨论了其中的谱修正、成像及通道均衡等问题;针对系统的低载频特性,采用了STAP、DPCA结合ATI、图像域STAP 3种GMTI方法.外场试验证明,该系统能够有效地抑制杂波,检测运...